All videos · All how-to videos

How to build a workbench you can measure in R3

0:44 · 2026-10-30

With R3 connected, paste the woodwork sentence into Claude. Claude reads R3's woodwork guide and makes a new project. It adds every board at its real size: the top, four legs, the rails and a shelf. Then the measuring controls, a floor, and a camera that shows the whole bench. Last, you get a preview link and a cut list. Open the link and tap a board to see its sizes. Tap a leg, and it shows that one's length, width and thickness. Narration: AI voice.

Watch on YouTube

Chapters

  1. 0:00 Paste the woodwork sentence
  2. 0:06 Claude reads the woodwork guide
  3. 0:11 Every board at its real size
  4. 0:19 Measuring controls, floor and camera
  5. 0:25 A preview link and a cut list
  6. 0:31 Tap a board: its sizes

Transcript

0:02 With R3 connected, paste the woodwork sentence into Claude.

0:06 Claude reads R3's woodwork guide, and makes a new project.

0:11 It adds every board at its real size. The top, four legs, the rails, and a shelf.

0:19 Then the measuring controls, a floor, and a camera that shows the whole bench.

0:25 Last, it gives you a preview link, and a cut list.

0:31 Open the link, and tap a board. There are its sizes.

0:35 Tap a leg, and it shows that one's length, width and thickness.