Workbench: A 1200 x 600 Workbench Designed in 3D
A 3D project by R3 team.
First published 18 November 2026, last updated 18 November 2026.
A sturdy 1200 x 600 workbench with a lower shelf, modelled to real sizes in 3D. Turn it, look at every joint and plan your own build, right in your browser.
Workbench
A sturdy workbench with a lower shelf, modelled board by board at real sizes: a 1200 × 600 mm beech top, 28 mm thick, on four 70 × 70 mm oak legs, with oak aprons and rails and a walnut shelf near the floor. The top stands 900 mm high.
Controls
- Click or tap a board to see its sizes: the view frames it and every edge shows its length. A corner that is not square shows its angle.
- Tap empty space or press
Escto let go of a board. - mm / in button (top left) or the
Ukey: switch between millimetres, centimetres and inches. - Drag to turn the view around the bench.
- Scroll or pinch to zoom;
+and-work too. - Right-drag or two fingers to slide the view.
Things to try
- Check a joint: tap a leg, then an apron, and compare where they meet.
- Plan your own build: write down each board's length, width and thickness as a cut list.
- Remix it on R3 to change the sizes for your own workshop.